NCCure 203W
Water based concrete curing compound
NCCure 203W is a water based curing compound forming a membrane composed of a blend of wax and other petroleum extracts in emulsion form.
It conforms to specification type: ASTM C309Type1/Type II, Class A.
Provides a highly economical and efficient means of retaining the moisture in fresh concrete thereby providing excellent concrete curing.
- Reduces drying shrinkage.
- Reduces the incidence of hairline cracks.
- Single Application.
- Very cost effective.
- Initial white color shows areas of use.
- Cured film is clear and water repellent.
- High curing efficiency.
- Interior and exterior concrete.
- Curing compound for fresh concrete.
- Sealing old concrete.
NCCure 203W is supplied in 20 and 210 kg drums. It can also be supplied in tanker load.
- Concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent absorption of the NCCure 203W
- Requires no pre-blending and should be used directly from the container.
- Apply at a uniform coverage by spray or roller application. Product may be sprayed with a hand held “pump-up” sprayer or with an airless industrial sprayer.
- If roller applied, use a short napped, solvent resistant sleeve.
- Allow the product to dry 4-6 hours before exposure to traffic.
- Do not apply concrete surfaces at ambient temperature below 4 degree C warm material to a minimum temperature of 10 degree C before use.
- Do not apply over bleed water or free.
- Do not apply over concretee to recevive concrete toppings, epoxy, or urethane based coatings or adhesives.
- For best cure of freshly placed concrete, apply NC Cure 203W as soon as possible after finishing operations and/or immediately after the disappearance of the “sheen” of surface moisture.
- When applying on old concrete, the surface must be clean and dry. Remove contaminants and stains such as waxes, grease and oil with strong soaps or caustics rather than acids. Badly worn or porous areas may need a second application to attain a uniform seal and surface gloss. NCCure 203 W may be placed on top of the previous coat of the same product. The surface must be clean and dry for proper adhesion.
- Clean tools and equipment with water before the material hardens.
Specifications
Storage & Safety
Storage
NCCure 203W must be stored in a properly sealed container at a temperature range of 5 – 45 C away from direct sunlight. . If stored properly it has a shelf life of 1 year in original sealed unopened condition .
Safety
Direct Contact with body parts such as eyes, mouth and skin should be avoided. In case of ingested, seek immediate medical attention.
In case of contact with eyes wash with splashes of clean water and seek immediate medical assistance. Keep away from children and animals. Do not reuse containers for storage of items for human consumption .
Information provided here is true and accurate to our best knowledge ,experience and belief . No warranty either implied or expressed is given by us or our representatives . Users are advised to make their own lab and field trials prior to using the material . The results may vary depending on other material , usage conditions or usage methods.